Click to buy via WhatsApp!
[giaban]CALL FOR PRICE[/giaban]
[mota]
- Thoroughly mix 1 kg of Barrier Cement Waterproofing Additive to a 50 kg bag of cement. Mixing to be done in a dry state, then add the aggregate and water.
[/mota]
[availability] IN STOCK [/availability]
[varieties]
[/varieties]
[chitiet]
WEBER BARRIER WP ADDITIVE
An essential waterproofing additive for mixing into cement.
It is an admixture in white powder form. Its addition to a concrete or mortar mix will improve the water repellency of the finished product.
Can be used in order to prevent water penetration;
• on interior and exterior surfaces • to prevent moisture problems
PACKAGE: 1 KG, 5KG
[/chitiet]
[giaban]CALL FOR PRICE[/giaban]
[mota]
- Use rubber gloves to handle the product.
- In the event of large leaks with strong pressure, plug in successive phases.
- To seal large leaks, it is recommended to start by applying weber.tec imperstop to the edges of the hole progressively forming a smaller hole.
- As it warms up, its curing begins, then proceed to plugging.
- Application thickness: 2 to 8 cm.
- Waiting time to coat: 24 hours.
- Easy application by hand.
- Immediate hardening.
- Direct application to cracks and breaks.
[/mota]
[availability] IN STOCK [/availability]
[varieties] Restrictions:
- Application temperatures between 5 and 35 ºC.
- Do not apply on frozen surfaces or those with a risk of frost within 24 hours after application, or exposed to full sun or very hot.
- Do not use to repair concrete.
- Do not use to plug or fill large surfaces.
- It does not resist the cracking of the support.
[/varieties]
[chitiet]
WEBERTEC IMPER G
Way shutter and water leaks.
One-component mortarsetting instant and resistant to sea water, for clogging small waterways or leaks through cracks or breaks for use both indoors and outdoors.
One-component mortar
PACKAGE: 5KG
[/chitiet]
[giaban]CALL FOR PRICE[/giaban]
[mota]
- Prior to application, repair degraded areas and fill concrete voids with weberep hormiplus neo or weberep hormitec express
- New concrete must be stabilized (28 days)
- Always treat singular points (angles, corners, ...) with waterproofing strips, weberdry imperbanda or with half rods made with weberep hormiplus neo or weberep hormitec express
- Always apply on perfectly smooth and planimetric substrates
- Application thickness: minimum 2 mm in two layers (1 to 2 mm per layer).
- Waiting time between coats: 4 hours.
- Waiting time to coat: 24 - 48 hours.
- Waiting time for immersion in water: 4 days.
- In drinking water tanks, fill and empty to guarantee the elimination of possible migrations of mortar and dust in the water.
- High flexibility.
- It does not alter the drinkability of the water.
- Resists pressure and back pressure.
- Crack bridging
[/mota]
[availability] IN STOCK [/availability]
[varieties] Restrictions:
- Application temperatures between 5 and 35 ºC.
- Do not apply on frozen surfaces or those with a risk of frost within 24 hours after application, or exposed to full sun or very hot.
- Do not apply on substrates that are constantly oozing water
[/varieties]
[chitiet]
WEBERTEC IMPER FLEX
One-component flexible waterproofing.
Highly flexible one-component mortar for waterproofing in areas subject to possible small movements and at risk of cracking such as terraces, balconies, roofs and roofs, before laying a coating
Highly flexible one-component mortar for waterproofing in areas subject to possible small movements and at risk of cracking such as terraces, balconies, roofs and roofs, before laying a coating
PACKAGE: 5KG, 15KG
[/chitiet]
[giaban]CALL FOR PRICE[/giaban]
[mota]
- Practical duration of use:> 30 minutes
- Delay between 2 coats: 6 hours minimum
- Time to backfill or replenish water: 7 days minimum
- Minimum recovery time:
- 48 hours for
coated or screed based on hydraulic binders - 7 days for glued tiles
- 15 days for painting or organic coating
- Tools: BMI brush, smoothing machine, whisk, slow electric mixer (300 rpm)
- Protective coating in accordance with standard NF EN 1504-2
- Used to treat foundations, casings, swimming pools, basins
- Waterproofs under pressure and back pressure
- Direct application by brush on concrete blocks or concrete
- Recoverable by plaster, tiles, paint
- Can be used in direct contact with drinking water
[/mota]
[availability] IN STOCK [/availability]
[varieties] Restrictions:
- Does not resist cracking of the substrate
- Does not hide the irregularities of the support
- Do not apply directly to bricks or stone rubble masonry. First carry out a
coated training - Is not intended for
waterproofing walls in elevation - Do not apply on floors subject to traffic without protection:
- pedestrian traffic (floor painting)
- vehicle traffic (screed, tiling, industrial flooring)
- Not intended for horizontal waterproofing (terrace)
[/varieties]
[chitiet]
WEBERDRY PLUS
Thick layer mineral waterproofing.
Mixture composed of a binder (hydraulic, aerial or synthetic), aggregates constituting the skeleton or the framework of the mortar (sand, fillers, aggregates of various materials) and, optionally, coloring pigments, additives, or various additions. Used for binding (masking cut or molded elements), coating (waterproofing and adorning walls, screeds and smoothing floors), but also for gluing, leveling, grouting, insulating, sealing, sealing, etc.
PACKAGE: 25KG
[/chitiet]
[giaban]CALL FOR PRICE[/giaban]
[mota]
- Moisten the support before its application.
- Always treat singular points (angles, corners, ...) with waterproofing strips or with half rods made with weberep hormiplus neo or weberep hormitec express .
- Can be applied by brush or trowel.
- Application thickness: minimum 2 mm in two crossed layers (1 to 2 mm per layer).
- Waiting time between coats: 4 hours.
- Waiting time to coat: 4 days.
- Waiting time for immersion in water: 4 days.
- For successful curing, the plaster should be moistened once a day for four days after application.
- It does not alter the drinkability of the water.
- Resists pressure and back pressure.
- Crystallization system in a porous system, ideal for waterproofing supports with continuous moisture in thick layers
[/mota]
[availability] IN STOCK [/availability]
[varieties] RESTRICTIONS
- Application temperatures between 5 and 35 ºC.
- Do not apply on frozen surfaces or those with a risk of frost within 24 hours after application, or exposed to full sun or very hot.
- Do not apply on irregular, non-planimetric substrates
- Do not apply on surfaces subject to possible movements, it does not resist cracking of the support.
- Do not apply outdoors with great thermal stress
[/varieties]
[chitiet]
WEBERTEC IMPER F
Mineral thin-layer waterproofing.
Mineral mortar specially designed for making thin-layer waterproofing plasters on smooth surfaces, on floors, walls or ceilings of buried constructions such as water tanks, ponds, swimming pools, basements, parking lots, elevator shafts, tunnels, foundations, as well as concrete retaining walls.
Mineral mortar specially designed for making thin-layer waterproofing plasters on smooth surfaces, on floors, walls or ceilings of buried constructions such as water tanks, ponds, swimming pools, basements, parking lots, elevator shafts, tunnels, foundations, as well as concrete retaining walls.
PACKAGE: 25KG
[/chitiet]
[giaban]CALL FOR PRICE[/giaban]
[mota]
- It does not alter the drinkability of the water.
- Resists pressure and backpressure.
- Crystallization system in a porous system, ideal for waterproofing supports with the continuous moisture in thick layers
- Moisten the support before its application.
- Always treat singular points (angles, corners, ...) with waterproofing strips or with half rods made with weberep hormiplus neo or weberep hormitec express .
- Can be applied by brush or trowel.
- Application thickness: minimum 10 mm in two layers (5 to 10 mm per layer).
- Waiting time between coats: 3 hours.
- Waiting time to coat: 4 days.
- Waiting time for immersion in water: 4 days.
- For successful curing, the plaster should be moistened once a day for four days after application.
- On busy soils, the mortar must be protected.
- To ensure waterproofing there must be a minimum of 10 mm thickness at any point of the application
[/mota]
[availability] IN STOCK [/availability]
[varieties] Restrictions:
- Application temperatures between 5 and 35 ºC.
- Do not apply on frozen surfaces or those with a risk of frost within 24 hours after application, or exposed to full sun or very hot.
- Do not apply on surfaces with permanent humidity or with capillary rise.
- Do not apply on surfaces subject to possible movements, it does not resist cracking of the support.
[/varieties]
[chitiet]
WEBERTEC IMPER G
Thick layer mineral waterproofing.
Mineral mortar specially designed for the realization of regularization and waterproofing plasters in thick layers on surfaces that require a greater application thickness, on floors, walls, or ceilings of buried constructions such as water tanks, ponds, swimming pools, basements, parking lots, pits elevator, tunnels, foundations, as well as concrete retaining walls.
PACKAGE: 25KG
[/chitiet]