technical repairs

Home technical repairs

 

[giaban]CALL FOR PRICE[/giaban]


[hot]Sale[/hot]

[availability] IN STOCK [/availability]

[varieties]  

N/A

 [/varieties]

[mota]
  • Reduce plastic shrinkage cracks
[/mota]

[chitiet]

Concrete curing compound

Weberad cure Y 40 is a water-based curing compound for newly placed concrete surfaces. It produces a moisture-resistant membrane film on concrete surfaces to assure proper hydration of cement and reduce plastic shrinkage cracks.

Surface of Application: Ceiling, Roof, Wall, Floor

PACKAGE: 5L, 20L, 100L, 200L, 1000L
[/chitiet]




[giaban]CALL FOR PRICE[/giaban]



[hot]Sale[/hot]

[masp]HT02[/masp]

[mota]
  • A dazzling finish
  • You won't see a wrinkle on the facade
  • Smoothens and protects in one go
[/mota]

[availability] IN STOCK [/availability]

[varieties]  

N/A

Restrictions:

  • Application temperatures between 5 and 35 ºC.
  • Outdoors, do not apply on horizontal or sloping surfaces exposed to rainwater.
  • Do not apply on plaster.

[/varieties]

[chitiet]


[chitiet]
Very fine mineral coating for aesthetic repairs of practically any surface
Fine and mineral coating for plastering, smoothing and aesthetic repair of surfaces with irregularities, pores, etc. Very smooth and homogeneous surfaces are easily achieved both indoors and outdoors.
PACKAGE: 25KG
[/chitiet]




[giaban]CALL FOR PRICE[/giaban]


[hot]Sale[/hot]

[masp]HT02[/masp]

[mota]
  • High penetrating power.
  • Consolidating of dusty surfaces.
  • Homogenizes porosity.
[/mota]
[chitiet]
The promoter of adherence for porous substrates.
Water-based bonding resin that acts as adherence and primer to regulate absorption in applications on highly absorbent substrates, as well as a consolidator and surface hardener for weak substrates, such as mortars, lime mortars, stuccoes, etc.
PACKAGE: 10KG
[/chitiet]


[giaban]CALL FOR PRICE[/giaban]

[mota]

  • High benefits at an early age and at 28 days.
  • Perfect adherence with concrete and metal.
  • Suitable for marine environments (resistant to sulfates and chlorides).
  • Impervious to water, oils and greases

[/mota]

[availability] IN STOCK [/availability]

[varieties]  

N/A

Restrictions:

  • Application temperatures between 5 and 35 ºC.
  • Do not exceed 30 cm thick per layer. At greater thicknesses, apply it in successive layers or layers

[/varieties]

[chitiet]

WEBERTEC IMPER G


Mortar fluid alt structural anchors as resistors
mortar anchors fluid and forms with high mechanical strength   (60 MPa at 28 days and 20 MPa at 24 hours) of retraction compensated and resistant to sulfates and sea water. Specially designed for the realization of anchoring of metallic elements on concrete, as well as anchoring of precast concrete elements or filled with formwork, cracks and cavities inside concrete masses.

Medium: Concrete, Cement mortar, Aerated concrete block

PACKAGE: 25KG
[/chitiet]


[giaban]CALL FOR PRICE[/giaban]

[mota]

  • High and fast mechanical performance
  • 3 in 1: Protection against reinforcement, concrete repair and aesthetic finish.
  • Sulfate and chloride resistant

[/mota]

[availability] IN STOCK [/availability]

[varieties] 

N/A

 Restrictions:

  • Application temperatures between 5 and 35 ºC.
  • Do not apply on frozen surfaces or those with a risk of frost within 24 hours after application, or exposed to full sun or very hot.
  • Do not apply on damp surfaces.
  • Do not apply to plaster or painted surfaces.

  [/varieties]

[chitiet]

WEBERTEC IMPER G


R4 multifunctional repairman settingfast, reinforcement passivator and smooth finish
High mechanical performance mortar with reinforcement passivator, especially suitable for repairing structural concrete elements in thicknesses of 1 to 5 cm, classified as R4 (according to EN 1504), highly resistant to sulphates and chlorides and therefore suitable for use in marine environments. Its workability and granulometry allow it to be used as an aesthetic finish repairer.

Medium: Concrete, Cement mortar

PACKAGE: 25KG
[/chitiet]


[giaban]CALL FOR PRICE[/giaban]

[mota]

  • Quick commissioning for floors with road traffic  .
  • Excellent resistance to flexotraction and abrasion.
  • Retraction compensated: high resistance to cracking.
  • Pumpable: high productivity.
  • High planimetry.

[/mota]

[availability] IN STOCK [/availability]

[varieties]  

N/A

Restrictions:

  • Do not apply on exterior floors. Use in this case weberfloor light structural, weberfloor firm or weberfloor 4630 industry lit.
  • For its installation in soils with permanent humidity, with problems of the phreatic level susceptible to humidity due to capillary rise, consult our technical department.

  [/varieties]

[chitiet]

WEBER FLOOR DUR


Industrial self-leveling mortar reinforced with fibers
High performance self-leveling technical polymeric screed in a thin layer with thicknesses of 5 to 30 mm for renovation and leveling of industrial pavements and car parks that require a demanding planimetry and high resistance to moderate trafficor intense. Thanks to its self-leveling power, it allows obtaining surfaces with a high flatness and a very fine finish, ideal for finishing with resin coatings and with high productivity as it is suitable to be pumped. It allows a quick commissioning both to cover and to open to traffic as it is setting and fast drying, in addition to a high resistance to cracking by retraction compared to a conventional self-leveling as it is retraction compensated.

PACKAGE: 25KG
[/chitiet]



[giaban]CALL FOR PRICE[/giaban]

[mota]

  • Has very great leveling power: very smooth surfaces with high flatness.
  • Armed with fiberglass.
  • Quick commissioning.
  • Retraction compensated: high resistance to cracking.
  • Pumpable. High productivity.

[/mota]

[availability] IN STOCK [/availability]

[varieties]  Restrictions:

  • Do not apply weberfloor fluid on exterior floors. Use in this case weberfloor light structural, weberfloor firm or weberfloor 4630 industry lit.
  • Do not apply weberfloor fluid on industrial floors or parking lots. Use in this case weberfloor dur, weberfloor for or weberfloor 4630 industry lit.
  • For its installation in soils with permanent humidity, with problems of the phreatic level susceptible to humidity due to capillary rise, consult our technical department.
  • weberfloor fluid must be covered with the associated coatings from the previous section. As a mineral decorative final finish, use weberfloor design (consult technical department). 
  • For coating with epoxy resins or polyurethanes, consult our technical department.

  [/varieties]

[chitiet]

WEBER FLOOR FLUID


Quick self-leveling mortar for thicknesses  from 8 to 50 mm
High-performance self-leveling polymeric technical screed for smoothing and regularizing interior floors in thick layers  from 8 to 50 mm thick . Thanks to its self-leveling power, it allows obtaining surfaces with a high level of flatness for laying light pavements, ceramic and technical floors with high productivity as it is suitable to be pumped. It allows a quick commissioning both to transit and to cover the being ofsetting and fast drying, in addition to minimizing the appearance of cracks due to retraction compared to a conventional self-leveling as it is retraction compensated. Suitable for radiant heating and as a floating screed.


Medium: Concrete, Cement mortar, Ceramic, Anhydrite

PACKAGE: 25KG
[/chitiet]


Sign up to receive information about offers and promotions

Your information will be kept strictly confidential and you can unsubscribe at any time.
-->